Do you ever get frustrated when something doesn’t work properly?
If you have a Samsung refrigerator, then you might want to check out this issue.
If you have a Samsung refrigerator and it’s not cooling, then there could be a few reasons for this.
This article will explain you how to fix this problem.

Why Samsung Refrigerator Not Cooling

Samsung refrigerator not cooling is very common issue faced by many people. It happens because of various reasons. First thing we need to know about Samsung refrigerator is that it is not only a refrigerator but it is also a freezer. So if you are facing problem with Samsung refrigerator not cooling then first check whether your fridge is having a freezer or not. If yes then remove the ice cube tray from the freezer and place it outside the fridge. Then open the door of the fridge and see whether the cold air is coming out or not. If no then try to switch off the power supply to the fridge. After switching off the power supply wait for 10 minutes and again turn on the power supply and open the door of the refrigerator. Now if the cold air is still not coming out then replace the compressor. If the problem persists then contact Samsung customer care service center.

Frosted Evaporator Coils

If you are getting frosted evaporator coils, then you need to clean the coils. Cleaning the coils will help in removing the dust particles and other impurities. To clean the coils follow these steps: 1 Remove the access panel from the back of the refrigerator. 2 Remove the screws holding the bottom plate in place.

blocked airflow.

Frosted evaporator coils are caused by ice buildup. This occurs because the refrigerant is not circulating properly. As a result, air is trapped between the coil fins and the evaporator pan. This results in the formation of ice crystals. The ice crystals block the flow of air across the fins, causing the evaporator to freeze up.

defrost heater assembly

Blocked airflow. Frosted evaporator coils are usually caused by ice buildup. Ice forms because the refrigerant is unable to circulate properly. Air gets trapped between the fins and the evaporator panel. This results in the freezing of the evaporator coils. The ice crystals block off the flow of air across fins, causing the evaporators to frost up.

Faulty thermistor

A faulty thermistor is the most common fault found in electric ovens. It is used to measure the temperature of the oven cavity. Thermistors are very sensitive devices and if not installed correctly, they can fail. Thermistors are usually located near the heating element. If the thermistor fails, the heating element will continue to operate but the temperature reading will be inaccurate.

Faulty Relay

A relay is a switch that opens or closes electrical circuits. In an electric oven, relays are used to open and close the circuit between the heating elements and the power source. If a relay fails, the heating elements won’t turn on or off properly. This could lead to overheating of the oven’s interior, causing damage to the wiring and components.

Faulty Compressor

A compressor is a mechanical device that uses air compression to produce a useful force. It is widely used in refrigerators, freezers, air conditioners, and other appliances. A compressor consists of two parts, the motor and the compressor itself. The motor converts electricity into rotational energy that turns the compressor. The compressor compresses air, turning it from a low density gas atmosphere to a higher density gas compressed air. The compressed air is then released back into the atmosphere.

Damper Control Assembly

The damper assembly controls the flow of air between the suction side and the discharge side of the compressor. Damper assemblies are usually located near the end of the evaporator coil where the coldest air exits the coil. This area is called the “cold spot”. In order to maintain proper airflow throughout the evaporator coil, the damper assembly must open and close properly.

Not Enough space from the wall

If the damper assembly is not installed correctly, it could restrict the airflow through the evaporator coil. This could result in ice build up on the coils and eventually freeze the evaporator coil. To prevent this problem, install the damper assembly away from the wall. Damper assembly does not open or close properly

Can Hear fridge running but not cooling?

1 Check the power supply to the refrigerator. Make sure that the power cord is plugged into a working outlet. 2 Check the refrigerant level in the evaporator coil. A low refrigerant level could prevent the unit from properly cooling.

Can a refrigerator compressor run but not cool?

Yes, if the temperature sensor fails to detect the temperature inside the refrigerator, the compressor will continue to run even though the temperature inside the refrigerator remains constant. 4. Display Display explains information about the refrigerator such as remaining storage space, freezer contents, door status, and other useful information.

Should the refrigerator compressor be hot?

There is no reset button on Samsung refrigerators. To reset the refrigerator, press the power button until the display turns off. Then turn the power button back on and wait for the display to explain the factory default setting. 3. Temperature Control Temperature control is used to maintain the desired temperature inside the refrigerator. It uses sensors to measure the temperature inside the refrigerator and adjusts the compressor accordingly. This helps to maintain the desired temperature in the refrigerator.

Why is my Samsung fridge and freezer not cold?

If the fan is making noise when the door is open, check if the fan switch is turned off. If the fan is still noisy even after turning the fan switch off, try changing the filter. If the problem persists, contact Samsung service center. 2. Cooling System This method works by circulating cool air around the refrigerator using fans and coils. Fans blow air into the refrigerator from the back and pull it out through vents located near the front. The air passes through the coils where it gets cooled. The cooler air is then blown back into the refrigerator again.

Why is my Samsung refrigerator and freezer not cooling?

Samsung refrigerators and freezers are designed to maintain a constant temperature throughout the interior. This is done using two different methods: 1 A thermostat controls the temperature inside the refrigerator. 2 A cooling system uses fans and coils to circulate cool air around the refrigerator. 1. Thermostat A thermostat regulates the temperature inside the refrigerator based on the ambient temperature outside. It senses the temperature inside the refrigerator and compares it to the desired temperature set by the user. If the temperature inside the refrigerator is higher than the desired temperature, the thermostat turns on the compressor to lower the temperature. If the temperature inside is lower than the desired temperature, it shuts down the compressor.

Where is the reset button on a Samsung refrigerator?

If the compressor is hot, the air conditioner may be running. Turn off the power switch and wait for 10 minutes. After 10 minutes, restart the power switch. If the problem still exists, contact a professional appliance repairman immediately. 3 Check whether the condenser fan is running. If the condenser fan is not running, replace the fuse. 4 Check whether the blower motor is turning. If the blower motor is not turning, replace the fuse. If the problem persists after replacing the fuses, contact a professional appliance service technician.

How do you fix a refrigerator that is not cooling?

Refrigerators are very important appliances in our homes. It keeps our food fresh and cold. But sometimes refrigerators stop working properly. This happens because of many reasons such as power outage, malfunctioning of compressor, bad wiring, faulty thermostat, broken fan motor, etc. These problems can be solved easily if we know how to repair a refrigerator. Here are some tips to help you fix a refrigerator. 1 Check whether the door is open or closed. If the door is open, check whether the door gasket is damaged. If the door gasket is intact, try closing the door. If the problem persists, call a professional appliance repairman. 2 Check whether the freezer compartment is frozen. If the freezer compartment is frozen, remove the ice from around the coils. Then, turn off the power supply to the unit. Remove the panel covering the evaporator coil. Clean the evaporator coil using a soft cloth dipped in warm water. Replace the panel and reattach the power supply.