Do you ever get stuck with a problem that seems impossible to solve?
If you find yourself in such a situation, don’t give up!
There’s always a solution if you look hard enough.
I’m going to explain you how to fix a common household appliance that has been giving me trouble for years.

Whirlpool washer not spinning

If the washing machine does not spin, check if the door is closed properly. Also check if the drain hose is connected correctly. If the washing machine does not rotate, check if the door was closed properly. Also check whether the drain hose is connected properly.

Lid switch

Check the lid switch. It could be defective. Drain pump Answer: Check the drain pump. It could be defective or clogged. Water level sensor Answer: Check the water level sensor. It could be defective Wash tub motor Answer: Check the wash tub motor. It could be defective, broken or clogged. If the washing machine is still not working after checking these points, please contact us. We will provide free service. Check the drain pump. It may be defective or clogged Check the water level sensor.It may be defective or clogged

Motor coupling or clutch

Check the motor coupling or clutch. It could be defective Lubrication system Answer: Check the lubrication system. It could be defective Belt drive Answer: Check the belt drive. It could be defective,broken or clogged. if the washing machine is still no working after checking these points please contact us. we will provide free service. Check the drain hose. It could be broken or clogged. If the washing machine is still not working after checking these points, please contact us. We will provide free service.

How do I fix a Whirlpool washer that won’t spin?

To reset the spin cycle on the front panel of your washing machine, press and hold the Start button until the display reads Reset Cycle. Then release the Start button. Press and hold Reset until the display reads Start. Release the Reset button. How to reset the spin cycle on my dishwasher?

How do I fix the spin cycle on my washing machine?

To reset the spin cycle on your Whirlpool washer, press and hold the START button until the display reads “Reset Cycle”. Then release the START button. Press and hold the RESET button until the display reads "Start". Release the RESET button.

Why is my Whirlpool washer not spinning?

Your washing machine is working properly. Your washer does not spin because the agitator is broken. To fix this problem, contact whirlpool repair service.

Why is my washer not doing the spin cycle?

1 Make sure the door latch the metal piece that holds the door shut is closed. 2 Check the drain hose connection the tube that drains the water from the tub. It should be connected to the drain pump.

Why is my Whirlpool washer not spinning or draining?

If your washing machine does not spin, check the following items: 1 Make sure the door latch is closed. 2 Check the drain hose connection. 3 Is the detergent dispenser full? 4 Are the clothes clean? 5 Is the water supply turned off? 6 Is the machine plugged in? 7 Is the power switch set to "on"? 8 Is the timer set to "off"? 9 Is the machine empty? 10 Is the agitator moving? 11 Is the door open? 12 Is the lid open? 13 Is the lid shut tight? 14 Is the lid latched? 15 Is the lid locked? 16 Is the lid release button depressed? 17 Is the lid release lever in the down position? 18 Is the lid release handle in the down position? 19 Is the lid release lock engaged? 20 Is the lid release knob in the down position? 21 Is the lid release spring engaged? 22 Is the lid release

[su_youtube_advanced url = "https://www.youtube.com/watch?v=TB_W6sPdzkM" controls = "no" rel = "no" fs = "no" modestbranding = "yes"]

How do you reset the spin cycle on a Whirlpool washer?

When you hear a humming sound coming from your washing machine, it could mean that something is wrong with the motor. To determine whether the problem is with the motor itself or the belt that connects the motor to the drum, follow these steps: First, remove the top panel of the machine. Next, locate the two screws holding the panel in place. Remove the panel. Finally, inspect the motor and the belt. A humming sound may indicate that the belt needs replacing. What causes a washing machine to stop spinning? Answer: Washing machines usually stop when the load is heavy or when the water level drops below the lowest point in the tub. This happens because the water level sensor detects the water level and sends a signal to the controller board. If the water level falls below the lowest point in your tub, the controller board stops the motor. If this happens, the only way to get the machine back to work is to unplug it and plug it back in.

Why is my washer running but not spinning?

To start the spin cycle, press the Start button on the front of the machine. If the machine does not start the spin cycle, check the following items: Make sure the lid is closed. Check if the lid is locked into place. If the lid is unlocked, try locking it again. Make sure the lid is properly connected to the machine. If the lid is loose, tighten it. Make sure the lid latch is working correctly. If the lid latch is broken, replace it. Make sure the door is closed. If the door is open, shut it. Make sure the wash basket is full. If the basket is empty, add clothes. Make sure the detergent dispenser is filled. If the dispenser is empty, refill it. Make sure the water level is correct. If the water level is low, fill the machine until the water line is even with the bottom of the tub. Make sure the water supply is turned on. If the water supply is off, turn it on. Make sure the drain hose is disconnected. If the drain hose is connected, disconnect it. Make sure the drain pump is running. If the drain pump is not running, turn it on. How do I fix an electric dryer that doesn’t heat up?

Why is my washer making a humming noise?

If the drain hose is clogged, the washing machine won’t spin or drain. To unclog the drain hose, remove the access panel from the back of the unit. Then, turn off the power switch located near the top right corner of the front panel. Next, open the door on the left side of the machine, and disconnect the drain hose. Finally, pull the drain hose out of the tub and clean it thoroughly. Once the drain hose is clear, reconnect it to the machine and turn the power switch back on.